📄️ 2.1 Installation and Login
This section guides you through installing the RDK Studio desktop client and completing your first login. The entire process typically takes less than 2 minutes.
📄️ 2.2 Flashing the System Image
Begin from this step when your board lacks a usable system, the existing system is corrupted, or you need to replace the image. If your board already boots normally, you can skip this section and proceed directly to 2.3 Connecting Your Device.
🗃️ 2.3 Connected Devices
3 items
📄️ 2.4 Configure Network
Configure Wi-Fi connectivity for the board so it can independently access the network. After configuration, even if the Type-C data cable or Ethernet cable is unplugged, you can still remotely access the board over the wireless network.
📄️ 2.5 Connect to AI Models
All AI capabilities in RDK Studio are powered by large language models. This section provides the simplest way to connect; detailed explanations of model entry fields, dual-lane routing mechanisms, and protocol determination rules can be found in 3.12 Configuration Center.
📄️ 2.6 Initiate Your First Conversation
By now, you’ve completed all six steps: installation, login, flashing, device connection, network configuration, and model integration. This section guides you through sending your first message to the AI to verify that the entire pipeline is working.