中文 EN

2. Quick Start

• 2.1. X5 EVB 1_B Development Board User Guide
  • 2.1.1. Functional Overview
    • 2.1.1.1. Specifications
    • 2.1.1.2. X5 EVB Accessories Description
  • 2.1.2. Function Module Layout
    • 2.1.2.1. Dimension Diagram
  • 2.1.3. Interface Usage Instructions
    • 2.1.3.1. Starting the Development Board
    • 2.1.3.2. DIP Switch
    • 2.1.3.3. Debug Serial Port
    • 2.1.3.4. Ethernet
    • 2.1.3.5. USB 3.0 Interface
    • 2.1.3.6. USB 2.0 Interface
    • 2.1.3.7. Camera (MIPI CSI) Interface
    • 2.1.3.8. HDMI Interface
    • 2.1.3.9. LCD (MIPI DSI) and TP Interface
    • 2.1.3.10. Independent I2C Interface
    • 2.1.3.11. Wi-Fi / Bluetooth
    • 2.1.3.12. TF Card
    • 2.1.3.13. 40-Pin Interface
      • Connection Example:
    • 2.1.3.14. RTC Interface
    • 2.1.3.15. ADC Interface
    • 2.1.3.16. Other Interfaces
• 2.2. X5 EVB V2P0 Development Board User Guide
  • 2.2.1. Functional Overview
    • 2.2.1.1. Specifications
    • 2.2.1.2. X5 EVB Accessories Description
  • 2.2.2. Functional Module Layout
    • 2.2.2.1. Dimension Diagram
  • 2.2.3. Interface Usage Instructions
    • 2.2.3.1. Powering On the Development Board
    • 2.2.3.2. DIP Switch
    • 2.2.3.3. Debug Serial Port
    • 2.2.3.4. Ethernet
    • 2.2.3.5. USB 3.0 Interface
    • 2.2.3.6. USB 2.0 Interface
    • 2.2.3.7. Camera (MIPI CSI) Interface
    • 2.2.3.8. HDMI Interface
    • 2.2.3.9. LCD (MIPI DSI) and TP Interface
    • 2.2.3.10. Independent I2C Interface
    • 2.2.3.11. Wi-Fi Antenna
    • 2.2.3.12. Wi-Fi / Bluetooth
    • 2.2.3.13. TF Card
    • 2.2.3.14. 40-Pin Interface
      • Connection Example:
    • 2.2.3.15. RTC
    • 2.2.3.16. ADC Interface
    • 2.2.3.17. Other Interfaces
    • 2.2.3.18. Notes
      • The difference between Secure and Non-secure
      • Identifying Hardware Version via Chip Silk Screen
• 2.3. X5 MD Development Board User Guide
  • 2.3.1. Functional Overview
    • 2.3.1.1. Product Introduction
    • 2.3.1.2. Specifications
    • 2.3.1.3. X5 MD Accessory Description
  • 2.3.2. IO Carrier Board Functional Module Layout
    • 2.3.2.1. Dimension Diagram
  • 2.3.3. Interface Usage Instructions
    • 2.3.3.1. Powering On the Development Board
    • 2.3.3.2. Booting from eMMC
    • 2.3.3.3. Debug Serial Port
    • 2.3.3.4. Ethernet
    • 2.3.3.5. USB 3.0 Interface
    • 2.3.3.6. USB 2.0 Interface
    • 2.3.3.7. IO Voltage Level Selection
    • 2.3.3.8. Camera (MIPI CSI) Interface
    • 2.3.3.9. HDMI Interface
    • 2.3.3.10. LCD (MIPI DSI) and TP Interface
    • 2.3.3.11. Wi-Fi antenna
    • 2.3.3.12. Wi-Fi / Bluetooth
    • 2.3.3.13. TF Card
    • 2.3.3.14. CANFD Interface
    • 2.3.3.15. 40PIN Interface
      • Connection Example:
    • 2.3.3.16. RTC
    • 2.3.3.17. Other Interfaces
• 2.4. Connect the Development Board
  • 2.4.1. Connecting via Serial Port
    • 2.4.1.1. Hardware Connection
    • 2.4.1.2. Using Serial Port on Windows
      • Install Driver
      • Connecting and Usage
    • 2.4.1.3. Using Serial Port on Ubuntu
      • Using minicom
  • 2.4.2. Connecting via Network Interface
    • 2.4.2.1. Windows Network Configuration
    • 2.4.2.2. Ubuntu Network Configuration
    • 2.4.2.3. Terminal Software Configuration
  • 2.4.3. Connecting via USB Port
    • 2.4.3.1. Installing Software on Windows
      • Installing USB Drivers
      • Installing USB Tools
    • 2.4.3.2. Installing Software on Ubuntu
      • Installing USB Drivers
      • Installing USB Tools
    • 2.4.3.3. Using adb
      • Common Commands
    • 2.4.3.4. Using fastboot
    • 2.4.3.5. Using dfu
    • 2.4.3.6. Virtual Network Interface Introduction
    • 2.4.3.7. Virtual Network Interface (RNDIS)
    • 2.4.3.8. Virtual Network Interface (CDC-ECM)
    • 2.4.3.9. Additional Features
• 2.5. System Image Flashing
  • 2.5.1. Overview
  • 2.5.2. Firmware Flashing Protocol Overview
  • 2.5.3. Graphical Tool Flashing Introduction
    • 2.5.3.1. Flashing Tool Interface Overview
      • Flashing Interface
      • Settings Interface
      • Driver Interface
    • 2.5.3.2. Flashing Methods Overview
    • 2.5.3.3. Flashing Tool Installation and Startup Guide
      • Installing and Launching XBurn on Windows
      • Installing and Launching XBurn on Ubuntu
      • Installing and Launching XBurn on macOS
      • Common Startup Issues
    • 2.5.3.4. Flashing Method Selection Guide
      • Selecting Download Mode When Image is Empty or Corrupted
      • Selecting Download Mode When Image is Normal
    • 2.5.3.5. USB Connection Upgrade Procedure
    • 2.5.3.6. Serial+USB connection mode upgrade process description
    • 2.5.3.7. Serial+Ethernet Connection Upgrade Procedure
    • 2.5.3.8. Serial Connection Upgrade Procedure
    • 2.5.3.9. Advanced Configuration
      • Auto-reboot after flashing
      • Full eMMC Erase
      • Enable Partition Backup/Restore Function
      • Burn Specified Partition Image
  • 2.5.4. Command-line Tool Introduction (Factory Version)
    • 2.5.4.1. Overview
    • 2.5.4.2. Command-line Environment Configuration
    • 2.5.4.3. Command-line Usage
      • Status Query and Basic Configuration
      • Core Flashing Configuration
      • Partition Operations and Security Control
      • Network Configuration
      • Interface Configuration
      • Usage Examples
  • 2.5.5. Manual Flashing Tool Introduction
    • 2.5.5.1. Flashing Images Using Fastboot Commands
    • 2.5.5.2. Flashing Images Using dfu Commands
      • dfu Command Flashing on Windows
      • dfu Command Flashing on Ubuntu
    • 2.5.5.3. Manually Flashing Images via Serial Port
  • 2.5.6. FAQ: Common Error Reference Table
    • 2.5.6.1. Environment Preparation Issues
      • Issue: Detect burn state error
      • Issue: Serial port not connected
      • Issue: Image path abnormal or image does not exist
      • Issue: Cannot find dfu device
    • 2.5.6.2. Firmware Type Errors
      • Issue: Flashing Non-Secure firmware on a Secure chip
      • Issue: Flashing Secure firmware on a Non-Secure chip
    • 2.5.6.3. Flashing Process Issues
      • Issue: Xmodem error “send error: expected ACK; got b’C’ for block 1”
      • Issue: Cannot find fastboot device
      • Issue: Fastboot error “Too many links”