▒enable watchdog success ! switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:2... Found U-Boot script /boot/boot.scr 664 bytes read in 1 ms (648.4 KiB/s) ## Executing script at 03c10000 Boot script loaded from devtype:mmc devnum:0 devplist:2 bootargs = console=ttyS0,921600 raid=noautodetect hobotboot.reson=POWER_RESET rootfstype=ext4 rw rootwait ubi.mtd=2,2048 mtdparts=hr_nand.0:6291456@0x0(miniboot),2097152@0x600000(env),0x400000@0x800000(boot),0x400000@0xC00000(system) root=/dev/mmcblk0p2 Loading fdt file: /boot/hobot/hobot-x3-cm.dtb 70464 bytes read in 3 ms (22.4 MiB/s) Loading kernel: /boot/Image 19163144 bytes read in 442 ms (41.3 MiB/s) ## Flattened Device Tree blob at 03c00000 Booting using the fdt blob at 0x3c00000 Loading Device Tree to 0000000003c00000, end 0000000003c1ffff ... OK chip_id: ab36300 The address of the fdt is 0x3c00000 libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND fdt get value hpu3501_addr at i2c bus(0) failed libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND fdt get value hpu3501_addr at i2c bus(1) failed hpu3501 is valid at i2c bus(5), enable it The address of the fdt is 0x3c00000 The address of the fdt is 0x3c00000 Changed status Done Ion Heap type CMA Mem Orign(MAX) bpu model Reserve Mem Size to 64M!! Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.87 (root@DESKTOP-6BIOIOF) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #4 SMP PREEMPT Sun Oct 1 08:29:19 CST 2023 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] Machine model: Hobot X3 CM [ 0.000000] earlycon: hobot0 at MMIO 0x00000000a5000000 (options '') [ 0.000000] bootconsole [hobot0] enabled [ 0.000000] OF: reserved mem: OVERLAP DETECTED! [ 0.000000] image_r5_mem (0x0000000080000000--0x0000000080010000) overlaps with msg_r5_mem (0x000000008000f000--0x0000000080010000) [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000004000000, size 672 MiB [ 0.000000] OF: reserved mem: initialized node ion_cma, compatible id shared-dma-pool [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 [ 0.000000] On node 0 totalpages: 1047808 [ 0.000000] DMA zone: 8180 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 523520 pages, LIFO batch:31 [ 0.000000] Normal zone: 8192 pages used for memmap [ 0.000000] Normal zone: 524288 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc17ff28000 s65176 r8192 d29032 u102400 [ 0.000000] pcpu-alloc: s65176 r8192 d29032 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1031436 [ 0.000000] Kernel command line: earlycon loglevel=8 kgdboc=ttyS0 video=hobot:x3sdb-hdmi console=ttyS0,921600 raid=noautodetect hobotboot.reson=POWER_RESET rootfstype=ext4 rw rootwait ubi.mtd=2,2048 "mtdparts=hr_nand.0:6291456@0x0(miniboot),2097152@0x600000(env),0x400000@0x800000(boot),0x400000@0xC00000(system)" root=/dev/mmcblk0p2 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] software IO TLB [mem 0x7afff000-0x7efff000] (64MB) mapped at [ffffffc07afff000-ffffffc07effefff] [ 0.000000] Memory: 3319572K/4191232K available (10494K kernel code, 1306K rwdata, 5756K rodata, 1088K init, 9553K bss, 167148K reserved, 704512K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008000000 - 0xffffff8008a40000 ( 10496 KB) [ 0.000000] .rodata : 0xffffff8008a40000 - 0xffffff8008ff0000 ( 5824 KB) [ 0.000000] .init : 0xffffff8008ff0000 - 0xffffff8009100000 ( 1088 KB) [ 0.000000] .data : 0xffffff8009100000 - 0xffffff8009246808 ( 1307 KB) [ 0.000000] .bss : 0xffffff8009246808 - 0xffffff8009b9aed8 ( 9554 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00008000 - 0xffffffbf06000000 ( 95 MB actual) [ 0.000000] memory : 0xffffffc000200000 - 0xffffffc180000000 ( 6142 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 36327 entries in 142 pages [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] parent_rate: 0, dclk->rate:2666000000, pre_ddr_rate:0, res.a0:139713232 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001220] clocksource: hobot_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns [ 0.003022] Console: colour dummy device 80x25 [ 0.003593] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.004898] pid_max: default: 32768 minimum: 301 [ 0.005554] Security Framework initialized [ 0.006072] AppArmor: AppArmor disabled by boot time parameter [ 0.006918] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.007786] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.023827] ASID allocator initialised with 65536 entries [ 0.031827] Hierarchical SRCU implementation. [ 0.063886] smp: Bringing up secondary CPUs ... [ 0.100095] Detected VIPT I-cache on CPU1 [ 0.100129] CPU1: Booted secondary processor [410fd034] [ 0.136148] Detected VIPT I-cache on CPU2 [ 0.136169] CPU2: Booted secondary processor [410fd034] [ 0.172204] Detected VIPT I-cache on CPU3 [ 0.172224] CPU3: Booted secondary processor [410fd034] [ 0.172278] smp: Brought up 1 node, 4 CPUs [ 0.176341] SMP: Total of 4 processors activated. [ 0.176935] CPU features: detected feature: 32-bit EL0 Support [ 0.177753] CPU: All CPU(s) started at EL1 [ 0.178283] alternatives: patching kernel code [ 0.179872] devtmpfs: initialized [ 0.188974] random: get_random_u32 called from bucket_table_alloc+0x108/0x270 with crng_init=0 [ 0.190608] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.191854] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.208374] xor: automatically using best checksumming function 32regs [ 0.209313] pinctrl core: initialized pinctrl subsystem [ 0.210550] NET: Registered protocol family 16 [ 0.211979] vdso: 2 pages (1 code @ ffffff8008a46000, 1 data @ ffffff8009104000) [ 0.212922] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.214514] DMA: preallocated 256 KiB pool for atomic allocations [ 0.215576] pstore: using zlib compression [ 0.216370] console [pstore-1] enabled [ 0.216965] pstore: Registered ramoops as persistent store backend [ 0.217749] ramoops: attached 0x40000@0x3fc0000, ecc: 0/0 [ 0.223030] hobot_dma a1005000.dma: Hobot DMA Engine Driver Probed!! [ 0.236858] SCSI subsystem initialized [ 0.237489] media: Linux media interface: v0.10 [ 0.238083] Linux video capture interface: v2.00 [ 0.238729] pps_core: LinuxPPS API ver. 1 registered [ 0.239356] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.240544] PTP clock support registered [ 0.241668] ion_dummy: not reserve carveout memory, try to alloc from cma [ 0.378352] Advanced Linux Sound Architecture Driver Initialized. [ 0.379512] usbcore: registered new interface driver usbfs [ 0.380239] usbcore: registered new interface driver hub [ 0.380993] usbcore: registered new device driver usb [ 0.382000] clocksource: Switched to clocksource arch_sys_counter [ 0.429706] VFS: Disk quotas dquot_6.6.0 [ 0.430283] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.431226] FS-Cache: Loaded [ 0.431712] CacheFiles: Loaded [ 0.437006] NET: Registered protocol family 2 [ 0.437933] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.439079] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.440326] TCP: Hash tables configured (established 32768 bind 32768) [ 0.441239] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.442098] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.443101] NET: Registered protocol family 1 [ 0.443939] RPC: Registered named UNIX socket transport module. [ 0.444690] RPC: Registered udp transport module. [ 0.445287] RPC: Registered tcp transport module. [ 0.445885] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.447487] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.449735] audit: initializing netlink subsys (disabled) [ 0.450659] audit: type=2000 audit(0.448:1): state=initialized audit_enabled=0 res=1 [ 0.450913] Initialise system trusted keyrings [ 0.450999] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.454586] zbud: loaded [ 0.456152] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.457013] exFAT: Version 1.2.9 [ 0.457491] FS-Cache: Netfs 'nfs' registered for caching [ 0.458645] NFS: Registering the id_resolver key type [ 0.459297] Key type id_resolver registered [ 0.459824] Key type id_legacy registered [ 0.460339] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.461192] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.465364] NET: Registered protocol family 38 [ 0.465935] async_tx: api initialized (async) [ 0.466636] Key type asymmetric registered [ 0.467154] Asymmetric key parser 'x509' registered [ 0.467841] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.468858] io scheduler noop registered [ 0.469507] io scheduler cfq registered (default) [ 0.470118] io scheduler mq-deadline registered [ 0.470690] io scheduler kyber registered [ 0.471927] pinctrl-single a6003170.pinctrl_voltag: 64 pins at pa ffffff8009c4d170 size 8 [ 0.473262] pinctrl-single a6004000.pinctrl: 128 pins at pa ffffff8009c61000 size 512 [ 0.474502] pinctrl_cdev soc:pinctrl_cdev@0xA6004000: start probe [ 0.475395] pinctrl_cdev soc:pinctrl_cdev@0xA6004000: probe ok [ 0.476268] gpio-x3 a6003000.gpio: x3 gpio probe start!!! [ 0.476959] gpio-x3 a6003000.gpio: x3 gpio add gpiochip start!!! [ 0.477881] gpio-x3 a6003000.gpio: diable all gpio irq [ 0.480271] gpio-x3 a6003000.gpio: irqbase:61 [ 0.480824] gpio-x3 a6003000.gpio: x3 irq add start!!! [ 0.481481] irq: Cannot allocate irq_descs @ IRQ61, assuming pre-allocated [ 0.482526] gpio-x3 a6003000.gpio: x3 irq add ok!!! [ 0.483179] gpio-x3 a6003000.gpio: x3 irqchip ops add ok!!! [ 0.483884] gpio-x3 a6003000.gpio: x3 gpio probe ok!!! [ 0.485017] hobot-pwm: hobot-pwmchip0 registered [ 0.485772] hobot-pwm: hobot-pwmchip1 registered [ 0.486571] hobot-pwm: hobot-pwmchip2 registered [ 0.487953] diag dev [ver:1.1] init done [ 0.488867] hobot_ddr_monitor: LPDDR4 detected [ 0.489631] hobot_ddr_monitor: ddr monitor init finished. [ 0.490081] [vcam] init start [ 0.491141] vcam probe start [ 0.491603] vcam probe end successful [ 0.492064] [vcam] init end [ 0.493000] a5000000.serial: ttyS0 at MMIO 0xa5000000 (irq = 10, base_baud = 12000000) is a hobot-uart [ 0.494325] console [ttyS0] enabled [ 0.494325] console [ttyS0] enabled [ 0.495209] bootconsole [hobot0] disabled [ 0.495209] bootconsole [hobot0] disabled [ 0.496549] hobot-uart a5001000.serial: Failed to create debugfs root directory [ 0.497555] a5001000.serial: ttyS1 at MMIO 0xa5001000 (irq = 11, base_baud = 12000000) is a hobot-uart [ 0.499051] hobot-uart a5002000.serial: Failed to create debugfs root directory [ 0.500050] a5002000.serial: ttyS2 at MMIO 0xa5002000 (irq = 12, base_baud = 12000000) is a hobot-uart [ 0.501500] hobot-uart a5003000.serial: Failed to create debugfs root directory [ 0.502570] a5003000.serial: ttyS3 at MMIO 0xa5003000 (irq = 13, base_baud = 12000000) is a hobot-uart [ 0.504117] KGDB: Registered I/O driver kgdboc [ 0.504959] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.510418] brd: module loaded [ 0.514913] loop: module loaded [ 0.516508] spi-nand hr_nand.0: GigaDevice SPI NAND was found. [ 0.517268] spi-nand hr_nand.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 [ 0.518485] 4 cmdlinepart partitions found on MTD device hr_nand.0 [ 0.519280] Creating 4 MTD partitions on "hr_nand.0": [ 0.519934] 0x000000000000-0x000000600000 : "miniboot" [ 0.524828] 0x000000600000-0x000000800000 : "env" [ 0.527159] 0x000000800000-0x000000c00000 : "boot" [ 0.530742] 0x000000c00000-0x000001000000 : "system" [ 0.535441] hobot_spi a5005000.spi: ver: HOBOT-spi_V20.200330 master [ 0.536502] libphy: Fixed MDIO Bus: probed [ 0.537743] st_gmac a5014000.ethernet: found phy-handle subnode [ 0.538612] st_gmac a5014000.ethernet: xj3_mtl_setup, plat->rx-queues-to-use:4, and tx:4 [ 0.539802] st_gmac a5014000.ethernet: xj3_probe_config_dt, clk_ptp_rate:250000000 [ 0.540806] set mac address 00:11:22:cf:e3:89: [ 0.540808] (using random mac adress) [ 0.541852] (NULL device *): xj3_get_hw_features, tx_fifo_size:16384 [ 0.542677] (NULL device *): xj3_get_hw_features, rx_fifo_size:16384 [ 0.543495] st_gmac a5014000.ethernet: TSO supported [ 0.544134] st_gmac a5014000.ethernet: TSO feature enabled [ 0.544841] st_gmac a5014000.ethernet: Enable Rx Mitigation via HW Watchdog Timer [ 0.665906] libphy: hobot-mac-mdio: probed [ 0.667466] st_gmac a5014000.ethernet: hobot_eth_probe: probe sucessfully [ 0.668703] dwc3-of-simple b2000000.usb: failed to get usb regulator 0v8. [ 0.670177] usbcore: registered new interface driver cdc_acm [ 0.670906] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.671957] usbcore: registered new interface driver uas [ 0.672672] usbcore: registered new interface driver usb-storage [ 0.673500] usbcore: registered new interface driver usbserial [ 0.674294] usbcore: registered new interface driver usbserial_generic [ 0.675153] usbserial: USB Serial support registered for generic [ 0.675947] usbcore: registered new interface driver usb_serial_simple [ 0.676803] usbserial: USB Serial support registered for carelink [ 0.677604] usbserial: USB Serial support registered for zio [ 0.678378] usbserial: USB Serial support registered for funsoft [ 0.679169] usbserial: USB Serial support registered for flashloader [ 0.680003] usbserial: USB Serial support registered for google [ 0.680782] usbserial: USB Serial support registered for libtransistor [ 0.681637] usbserial: USB Serial support registered for vivopay [ 0.682444] usbserial: USB Serial support registered for moto_modem [ 0.683270] usbserial: USB Serial support registered for motorola_tetra [ 0.684139] usbserial: USB Serial support registered for novatel_gps [ 0.684972] usbserial: USB Serial support registered for hp4x [ 0.685727] usbserial: USB Serial support registered for suunto [ 0.686523] usbserial: USB Serial support registered for siemens_mpi [ 0.687367] usbcore: registered new interface driver rio500 [ 0.688215] mousedev: PS/2 mouse device common for all mice [ 0.699287] hobot-rtc a6002000.rtc: rtc core: registered hobot-rtc as rtc0 [ 0.700282] i2c /dev entries driver [ 0.700899] hobot-i2c a5009000.i2c: hobot i2c probe start [ 0.701666] hobot-i2c a5009000.i2c: round_rate:96000000 [ 0.702367] hobot-i2c a5009000.i2c: I2C bus speed is 400000 [ 0.703085] hobot-i2c a5009000.i2c: clkdiv = 0x1d [ 0.703691] hobot-i2c a5009000.i2c: i2c0 diag register.... [ 0.704910] hobot-i2c a5009000.i2c: hobot_i2c_0 probe done [ 0.705723] hobot-i2c a500a000.i2c: hobot i2c probe start [ 0.706511] hobot-i2c a500a000.i2c: round_rate:96000000 [ 0.707188] hobot-i2c a500a000.i2c: I2C bus speed is 100000 [ 0.707905] hobot-i2c a500a000.i2c: clkdiv = 0x77 [ 0.708512] hobot-i2c a500a000.i2c: i2c1 diag register.... [ 0.709529] hobot-i2c a500a000.i2c: hobot_i2c_1 probe done [ 0.710364] hobot-i2c a500c000.i2c: hobot i2c probe start [ 0.711118] hobot-i2c a500c000.i2c: round_rate:96000000 [ 0.711794] hobot-i2c a500c000.i2c: I2C bus speed is 400000 [ 0.712512] hobot-i2c a500c000.i2c: clkdiv = 0x1d [ 0.713118] hobot-i2c a500c000.i2c: i2c3 diag register.... [ 0.714015] hobot-i2c a500c000.i2c: hobot_i2c_3 probe done [ 0.714813] hobot-i2c a5017000.i2c: hobot i2c probe start [ 0.715562] hobot-i2c a5017000.i2c: round_rate:96000000 [ 0.716239] hobot-i2c a5017000.i2c: I2C bus speed is 400000 [ 0.716956] hobot-i2c a5017000.i2c: clkdiv = 0x1d [ 0.717562] hobot-i2c a5017000.i2c: i2c5 diag register.... [ 0.718766] hpu3501-regulator hpu3501-regulator.0.auto: ocp_cfg1r will be default value [ 0.719797] hpu3501-regulator hpu3501-regulator.0.auto: ocp_cfg2r will be default value [ 0.722396] VCC_CPU: Failed to create debugfs directory [ 0.723731] hobot-i2c a5017000.i2c: hobot_i2c_5 probe done [ 0.724803] tc358743 0-000f: untested bps per lane: 972000000 bps [ 0.780555] tc358743 0-000f: tc358743 found @ 0x1e (Hobot I2C adapter) [ 0.781509] lirc_dev: IR Remote Control driver registered, major 239 [ 0.782345] IR LIRC bridge handler initialized [ 0.783112] sif_mclk clock frequence is 544000000 [ 0.783749] mipi_rx0_ipi clock frequence is 544000000 [ 0.784443] mipi_rx1_ipi clock frequence is 544000000 [ 0.785143] mipi_rx2_ipi clock frequence is 544000000 [ 0.785854] mipi_rx3_ipi clock frequence is 544000000 [ 0.786596] mipi_tx_ipi clock frequence is 544000000 [ 0.787319] mipi_cfg_host clock frequence is 102000000 [ 0.788074] pym_mclk clock frequence is 1188000000 [ 0.788799] mipi_dev_ref clock frequence is 24000000 [ 0.789556] mipi_host_ref clock frequence is 24000000 [ 0.790352] sensor0_mclk clock frequence is 37125000 [ 0.791132] sensor1_mclk clock frequence is 37125000 [ 0.791925] sensor2_mclk clock frequence is 37125000 [ 0.792731] sensor3_mclk clock frequence is 37125000 [ 0.793370] [FRT:D] x3_ips_probe(0) [ 0.794457] hobot swinfo sel reg ro=0x1 boot dump [ 0.795426] pvt a1009000.pvt: SCRATCH test: 1234abcd, pvt is alive. [ 0.796355] pvt a1009000.pvt: VM Calibrated data detected [ 0.798307] pvt a1009000.pvt: SDIF status busy or lock, status 0x00000002 [ 0.799492] hobot_wdt a1002000.watchdog: watchdog setting [pet:6s bark:11s bite:15s] [ 0.800813] hobot_wdt a1002000.watchdog: Hobot Watchdog Timer at ffffff8009db3000 with timeout 15s [ 0.802211] device-mapper: uevent: version 1.0.3 [ 0.802981] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 0.804138] device-mapper: verity-avb: AVB error handler initialized with vbmeta device: [ 0.806934] Synopsys Designware Multimedia Card Interface Driver [ 0.807961] dwmmc_hobot a5010000.dwmmc: ver: HOBOT-mmc_V20.200402 [ 0.808788] dwmmc_hobot a5010000.dwmmc: card-detect-delay not found. [ 0.809606] dwmmc_hobot a5010000.dwmmc: data-addr not found. [ 0.810690] mmc_host mmc0: card is non-removable. [ 0.851214] dwmmc_hobot a5011000.dwmmc: ver: HOBOT-mmc_V20.200402 [ 0.854053] dwmmc_hobot a5011000.dwmmc: card-detect-delay not found. [ 0.854873] dwmmc_hobot a5011000.dwmmc: data-addr not found. [ 0.859643] dwmmc_hobot a5011000.dwmmc: mmc set to fixed voltage 1800 [ 0.860715] mmc_host mmc1: card is non-removable. [ 0.958212] dwmmc_hobot a5012000.dwmmc: ver: HOBOT-mmc_V20.200402 [ 0.959044] dwmmc_hobot a5012000.dwmmc: card-detect-delay not found. [ 0.959881] dwmmc_hobot a5012000.dwmmc: data-addr not found. [ 0.960624] dwmmc_hobot a5012000.dwmmc: request sd-power gpio failed! [ 0.965735] mmc_host mmc2: card is polling. [ 0.994192] mmc0: new HS200 MMC card at address 0001 [ 0.995157] mmcblk0: mmc0:0001 BJTD4R 29.1 GiB [ 0.995912] mmcblk0boot0: mmc0:0001 BJTD4R partition 1 4.00 MiB [ 0.996839] mmcblk0boot1: mmc0:0001 BJTD4R partition 2 4.00 MiB [ 0.997759] mmcblk0rpmb: mmc0:0001 BJTD4R partition 3 4.00 MiB [ 0.999065] mmcblk0: p1 p2 [ 1.056367] dwmmc_hobot a5011000.dwmmc: card claims to support voltages below defined range [ 1.142231] ledtrig-cpu: registered to indicate activity on CPUs [ 1.143064] hidraw: raw HID events driver (C) Jiri Kosina [ 1.143909] usbcore: registered new interface driver usbhid [ 1.144634] usbhid: USB HID core driver [ 1.145212] logger: created 256K log 'log_main' [ 1.145853] logger: created 256K log 'log_events' [ 1.146539] logger: created 256K log 'log_radio' [ 1.147187] logger: created 256K log 'log_system' [ 1.148236] set dmc devfreq governor to performance [ 1.148868] hobot_dmcfreq_target: dmcfreq->rate:2666000000, target_rate:2666000000 [ 1.149841] buf:, powersave_rate:2666000000, dmcfreq->pre_state:0 [ 1.151556] usbcore: registered new interface driver snd-usb-audio [ 1.152713] Netfilter messages via NETLINK v0.30. [ 1.153338] ip_set: protocol 6 [ 1.153821] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 1.154852] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.155776] arp_tables: arp_tables: (C) 2002 David S. Miller [ 1.156580] Initializing XFRM netlink socket [ 1.157437] NET: Registered protocol family 10 [ 1.158682] Segment Routing with IPv6 [ 1.159191] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.160288] NET: Registered protocol family 17 [ 1.160918] Key type dns_resolver registered [ 1.162672] Loading compiled-in X.509 certificates [ 1.166207] Loaded X.509 cert 'Build time autogenerated kernel key: 81cb0ef77db2fac76e9588c2120c82422367d268' [ 1.167540] zswap: loaded using pool lzo/zbud [ 1.172314] dwc3-of-simple b2000000.usb: usb regulator 0v8 enable succeed [ 1.173203] dwc3-of-simple b2000000.usb: b2000000.usb supply usb_3v3 not found, using dummy regulator [ 1.174424] dwc3-of-simple b2000000.usb: usb regulator 3v3 enable succeed [ 1.175955] dwc3 b2000000.dwc3: Configuration mismatch. user dr_mode(otg) not equal with hardware default mode(peripheral). still use otg mode [ 1.177613] dwc3 b2000000.dwc3: found 6 IN and 3 OUT endpoints [ 1.178650] ubi0: attaching mtd2 [ 1.191902] ubi0: scanning is finished [ 1.197147] ubi0: attached mtd2 (name "boot", size 4 MiB) [ 1.197845] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 1.198746] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 1.199619] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 1.200514] ubi0: good PEBs: 32, bad PEBs: 0, corrupted PEBs: 0 [ 1.201275] ubi0: user volume: 0, internal volumes: 1, max. volumes count: 128 [ 1.202234] ubi0: max/mean erase counter: 1/1, WL threshold: 4096, image sequence number: 0 [ 1.203307] ubi0: available PEBs: 8, total reserved PEBs: 24, PEBs reserved for bad PEB handling: 20 [ 1.204487] ubi0: background thread "ubi_bgt0d" started, PID 1178 [ 1.205288] console [netcon0] enabled [ 1.205760] netconsole: network logging started [ 1.206585] hobot-rtc a6002000.rtc: setting system clock to 1970-01-01 00:00:00 UTC (0) [ 1.207798] vps mipi_dphy: probe with x3vio done [ 1.208522] hobot_wdt_test: wdt_test_init: wdt test init [ 1.211392] VCC_CNN0: disabling [ 1.212146] VCC_CNN1: disabling [ 1.213352] vps mipi_host0: ver 140* port0(0:0) [ 1.214324] vps mipi_host1: ver 140* port1(1:0) [ 1.214599] mmc1: new HSSDIO card at address 0001 [ 1.215734] vps mipi_host2: ver 140* port2(0:1) [ 1.216524] vps mipi_host3: ver 140* port3(1:1) [ 1.217395] ALSA device list: [ 1.217780] No soundcards found. [ 1.218450] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 1.264855] EXT4-fs (mmcblk0p2): recovery complete [ 1.265881] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.266964] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.268088] devtmpfs: mounted [ 1.269703] Freeing unused kernel memory: 1088K [ 1.286290] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.287018] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 [ 1.288699] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe6d hci version 0x110 quirks 0x0000000000010010 [ 1.289952] xhci-hcd xhci-hcd.2.auto: irq 182, io mem 0xb2000000 [ 1.290970] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.14 [ 1.292044] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.292996] usb usb1: Product: xHCI Host Controller [ 1.293625] usb usb1: Manufacturer: Linux 4.14.87 xhci-hcd [ 1.294365] usb usb1: SerialNumber: xhci-hcd.2.auto [ 1.295406] hub 1-0:1.0: USB hub found [ 1.295930] hub 1-0:1.0: 1 port detected [ 1.296659] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.297382] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 1.298415] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 1.299314] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.300440] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.14 [ 1.301511] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.302500] usb usb2: Product: xHCI Host Controller [ 1.303129] usb usb2: Manufacturer: Linux 4.14.87 xhci-hcd [ 1.303843] usb usb2: SerialNumber: xhci-hcd.2.auto [ 1.304881] hub 2-0:1.0: USB hub found [ 1.305403] hub 2-0:1.0: 1 port detected [ 1.403568] systemd[1]: System time before build time, advancing clock. [ 1.417096] systemd[1]: systemd 245.4-4ubuntu3.21 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 1.420420] systemd[1]: Detected architecture arm64. Welcome to Ubuntu 20.04.6 LTS! [ 1.426979] systemd[1]: Set hostname to . [ 1.533527] random: lvmconfig: uninitialized urandom read (4 bytes read) [ 1.550057] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 1.700171] usb 1-1: New USB device found, idVendor=2109, idProduct=2822, bcdDevice= 0.30 [ 1.701243] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.702186] usb 1-1: Product: USB2.0 Hub [ 1.702839] usb 1-1: Manufacturer: VIA Labs, Inc. [ 1.747669] hub 1-1:1.0: USB hub found [ 1.748288] hub 1-1:1.0: 5 ports detected [ 1.812635] random: systemd: uninitialized urandom read (16 bytes read) [ 1.815981] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 1.817827] random: systemd: uninitialized urandom read (16 bytes read) [ 1.819513] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 1.822025] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 1.823930] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 1.826692] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ OK ] Set up automount Arbitrary…s File System Automount Point. [ 1.829266] systemd[1]: Reached target User and Group Name Lookups. [ OK ] Reached target User and Group Name Lookups. [ 1.831180] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 1.832531] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 1.834075] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ OK ] Listening on Device-mapper event daemon FIFOs. [ 1.836256] systemd[1]: Listening on LVM2 poll daemon socket. [ OK ] Listening on LVM2 poll daemon socket. [ 1.842390] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 1.851050] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 1.853455] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 1.855192] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 1.857670] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 1.859616] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 1.861697] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 1.863588] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 1.865379] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 1.867366] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 1.871217] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 1.876025] systemd[1]: Mounting RPC Pipe File System... Mounting RPC Pipe File System... [ 1.881074] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 1.885981] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 1.891989] systemd[1]: Starting Journal Service... Starting Journal Service... [ 1.896940] systemd[1]: Starting Availability of block devices... Starting Availability of block devices... [ 1.902632] systemd[1]: Starting Restore / save the current clock... Starting Restore / save the current clock... [ 1.908233] systemd[1]: Starting Set the console keyboard layout... Starting Set the console keyboard layout... [ 1.918075] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 1.926118] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... Starting Monitoring of LVM…meventd or progress polling... [ 1.936001] usb 2-1: New USB device found, idVendor=2109, idProduct=0822, bcdDevice= 0.30 [ 1.936771] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 1.937975] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.937980] usb 2-1: Product: USB3.1 Hub [ 1.937984] usb 2-1: Manufacturer: VIA Labs, Inc. Starting Load Kernel Module chromeos_pstore... [ 1.945901] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 1.952025] systemd[1]: Starting Load Kernel Module efi_pstore... Starting Load Kernel Module efi_pstore... [ 1.962549] systemd[1]: Starting Load Kernel Module pstore_blk... Starting Load Kernel Module pstore_blk... [ 1.971823] hub 2-1:1.0: USB hub found [ 1.971851] systemd[1]: Starting Load Kernel Module pstore_zone... [ 1.973396] hub 2-1:1.0: 4 ports detected Starting Load Kernel Module pstore_zone... [ 1.978234] systemd[1]: Condition check resulted in Load Kernel Module ramoops being skipped. [ 1.980758] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 1.986537] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 1.991556] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 1.997178] systemd[1]: Starting udev Coldplug all Devices... Starting udev Coldplug all Devices... [ 2.012677] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 2.015313] systemd[1]: Mounted RPC Pipe File System. [ OK ] Mounted RPC Pipe File System. [ 2.018433] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. [ 2.020952] systemd[1]: Mounted Kernel Trace File System. [ OK ] Mounted Kernel Trace File System. [ 2.024960] systemd[1]: Finished Availability of block devices. [ OK ] Finished Availability of block devices. [ 2.028900] systemd[1]: Finished Restore / save the current clock. [ OK ] Finished Restore / save the current clock. [ 2.033079] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st… nodes for the current kernel. [ 2.036584] systemd[1]: modprobe@chromeos_pstore.service: Succeeded. [ 2.038778] systemd[1]: Finished Load Kernel Module chromeos_pstore. [ OK ] Finished Load Kernel Module chromeos_pstore. [ 2.042329] systemd[1]: modprobe@efi_pstore.service: Succeeded. [ 2.044272] systemd[1]: Finished Load Kernel Module efi_pstore. [ OK ] Finished Load Kernel Module efi_pstore. [ 2.047152] systemd[1]: modprobe@pstore_blk.service: Succeeded. [ 2.049228] systemd[1]: Finished Load Kernel Module pstore_blk. [ OK ] Finished Load Kernel Module pstore_blk. [ 2.052085] systemd[1]: modprobe@pstore_zone.service: Succeeded. [ 2.054298] systemd[1]: Finished Load Kernel Module pstore_zone. [ OK ] Finished Load Kernel Module pstore_zone. [ 2.058260] systemd[1]: Finished Remount Root and Kernel File Systems. [ OK ] Finished Remount Root and Kernel File Systems. [ 2.061961] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 2.063313] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 2.068214] systemd[1]: Starting Load/Save Random Seed... Starting Load/Save Random Seed... [ 2.073648] systemd[1]: Starting Create System Users... Starting Create System Users... [ 2.105817] systemd[1]: Finished Create System Users. [ OK ] Finished Create System Users. [ 2.111713] systemd[1]: Starting Create Static Device Nodes in /dev... Starting Create Static Device Nodes in /dev... [ 2.126272] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage... [ OK ] Finished Create Static Device Nodes in /dev. [ 2.154113] systemd-journald[1239]: Received client request to flush runtime journal. [ 2.160268] systemd-journald[1239]: File /var/log/journal/316df62cda49462981a683c3982fe24e/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Finished udev Coldplug all Devices. Starting Helper to synchronize boot up for ifupdown... [ OK ] Finished Set the console keyboard layout. [ 2.259304] LT8618SXB debug: chip found @ 0x76 (Hobot I2C adapter) [ OK ] Finished Flush Journal to Persistent Storage. [ 2.486018] usb 1-1.5: new high-speed USB device number 3 using xhci-hcd [ 2.587097] usb 1-1.5: New USB device found, idVendor=2109, idProduct=8822, bcdDevice= 0.01 [ 2.588179] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.589119] usb 1-1.5: Product: USB Billboard Device [ 2.589793] usb 1-1.5: Manufacturer: VIA Labs, Inc. [ 2.590539] usb 1-1.5: SerialNumber: 0000000000000001 [ 3.998656] iar probe begin!!! [ 3.999487] hobot-iar a4301000.iar: bt656_func get error -19 [ 4.000218] hobot-iar a4301000.iar: mipi_dsi_func get error -19 [ 4.001061] error get bt656 output pin group config, use low 8bit default!! [ 4.001955] error get bt1120 clk invert config, use normal as default!! [ 4.018464] can't find timing for 1280*720, use default!! [ 4.019167] can't find timing for 800*480, use default!! [ 4.019852] can't find timing for 1080*1920, use default!! [ 4.020559] can't find timing for 704*576 touch, use default!! [ 4.021309] can't find timing for 720*480 touch, use default!! [ 4.022083] hobot_iar_probe: panel type is HDMI_TYPE [ 4.039969] iar probe end success!!! [ 4.049450] hb_vpu a8000000.vpu: vpu_aclk clock is 750000000 [ 4.050425] hb_vpu a8000000.vpu: vpu_bclk clock is 544000000 [ 4.051174] hb_vpu a8000000.vpu: vpu_cclk clock is 544000000 [ 4.060061] hb_jpu a8010000.jpu: jpg_aclk clock is 750000000 [ 4.060925] hb_jpu a8010000.jpu: jpg_cclk clock is 544000000 [ 4.071438] [FRT:D] x3_sif_probe(0) [ 4.104187] acamera_loglist_init [ 4.123764] [isp_drv]: camera_subdev_probe: register v4l2 lens device. result0 [ 4.124883] sensor_ctrl register success ! [ 4.173212] [isp_drv]: acamera_camera_async_complete: complete done, rc: 0. [ 4.179811] Hobot fb probe!!! [ 4.180557] channel id is 0, enable is 1, reg value is 0x1e40000. [ 4.180561] channel id is 2, enable is 1, reg value is 0x5c4f004. [ 4.678507] Console: switching to colour frame buffer device 240x67 [ 4.682049] fb0: x2-fb frame buffer at 0x15000000-0x157e8fff [ 4.682791] fb1: hobot-fb1 frame buffer at 0x157e9000-0x15fd1fff [* ] (1 of 5) A start job is running for Load/Save Random Seed (2s / 10min) [ 4.696397] hdmi: add sii902xA driver [ 4.712745] hobot_dev_ipu: [FRT:D] x3_ipu_probe(0) [ 4.721397] hobot_dev_pym: [FRT:D] x3_pym_probe(0) [ 4.728588] [FRT:D] x3_gdc_probe(0) [ 4.729229] [FRT:D] x3_gdc_probe(0) [ 4.736659] hobot_dev_osd: [FRT:D] x3_osd_probe(0) [ 4.747977] usbcore: registered new interface driver ch341 [ 4.748729] usbserial: USB Serial support registered for ch341-uart [ 4.755315] usbcore: registered new interface driver cp210x [ 4.756080] usbserial: USB Serial support registered for cp210x [ 4.765195] usbcore: registered new interface driver ftdi_sio [ 4.765985] usbserial: USB Serial support registered for FTDI USB Serial Device [ 4.781087] bpu_cores: module license 'Proprietary' taints kernel. [ 4.781891] Disabling lock debugging due to kernel taint [ 4.860424] Bluetooth: Core ver 2.22 [ 4.860943] NET: Registered protocol family 31 [ 4.861516] Bluetooth: HCI device and connection manager initialized [ 4.862410] Bluetooth: HCI socket layer initialized [ 4.863054] Bluetooth: L2CAP socket layer initialized [ 4.863763] Bluetooth: SCO socket layer initialized [ 4.875449] Bluetooth: HCI UART driver ver 2.2.3634cd9.20220519-142433 [ 4.876299] Bluetooth: HCI H4 protocol initialized [ 4.876916] Bluetooth: HCI Realtek H5 protocol initialized [ 4.877621] rtk_btcoex: rtk_btcoex_init: version: 1.2 [ 4.878350] rtk_btcoex: create workqueue [ 4.878948] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2 [ 4.888302] usbcore: registered new interface driver uvcvideo [ OK ] Finished Load Kernel Modules. Mounting Kernel Configuration File System... Starting Apply Kernel Variables... Starting udev Kernel Device Manager... [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished Apply Kernel Variables. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ OK ] Reached target Local Encrypted Volumes. [ OK ] Reached target Paths. [ OK ] Found device /dev/ttyS0. [ 5.235772] wm8960 0-001a: Failed to issue reset [ OK ] Found device /sys/subsystem/net/devices/eth0. [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Monitoring of LVM… dmeventd or progress polling. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Set console font and keymap... [ OK ] Started ifup for eth0. Starting Preprocess NFS configuration... Starting Tell Plymouth To Write Out Runtime Data... Starting Create Volatile Files and Directories... [ OK ] Finished Set console font and keymap. [ OK ] Finished Preprocess NFS configuration. [ OK ] Reached target NFS client services. [ OK ] Finished Tell Plymouth To Write Out Runtime Data. [ OK ] Finished Create Volatile Files and Directories. Starting RPC bind portmap service... Starting Network Name Resolution... Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started RPC bind portmap service. [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. [ OK ] Reached target RPC Port Mapper. [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Starting Load/Save RF Kill Switch Status... [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Finished Helper to synchronize boot up for ifupdown. Starting Raise network interfaces... [ OK ] Finished Raise network interfaces. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Started Ubuntu Advantage Timer for running repeated jobs. [ OK ] Reached target System Time Set. [ OK ] Reached target System Time Synchronized. [ OK ] Started Trigger anacron every hour. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily man-db regeneration. [ OK ] Started Message of the Day. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Accounts Service... [ OK ] Started Run anacron jobs. Starting Bluetooth management mechanism... [ OK ] Started D-Bus System Message Bus. Starting Network Manager... [ OK ] Started Save initial kernel messages after boot. Starting LSB: Lightweight SSH server... Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting LSB: adb daemon... Starting LSB: Custom self-starter... Starting Hobot Resize Root Filesystem... Starting Hobot Setting Status of LED... Starting Hobot load wifi driver... Starting System Logging Service... Starting LSB: Set sysfs variables from /etc/sysfs.conf... Starting Resets System Activity Data Collector... Starting Login Service... Starting LSB: usb try & port select for x3 dvb... Starting WPA supplicant... Starting LSB: hobot hdmi init... [ OK ] Started System Logging Service. [ OK ] Finished Hobot Setting Status of LED. [ OK ] Finished Hobot load wifi driver. [ OK ] Finished Resets System Activity Data Collector. [ OK ] Started LSB: usb try & port select for x3 dvb. [ OK ] Started LSB: Lightweight SSH server. [ OK ] Started Network Name Resolution. [ OK ] Started WPA supplicant. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started LSB: hobot hdmi init. [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf. [ 7.042591] ipu iar thread already run!! [ OK ] Started Network Manager. [ OK ] Reached target Network. [ OK ] Reached target Network is Online. [ OK ] Started ISC DHCP IPv4 server. [ OK ] Started ISC DHCP IPv6 server. Starting /etc/rc.local Compatibility... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... Starting LSB: HPA's tftp server... [ OK ] Started crash report submission daemon. [ OK ] Started /etc/rc.local Compatibility. [ OK ] Finished Permit User Sessions. Starting Light Display Manager... Starting Hold until boot process finishes up... Starting Hostname Service... [ OK ] Finished Hold until boot process finishes up. [ OK ] Started Serial Getty on ttyS0. Starting Set console scheme... [ OK ] Started LSB: HPA's tftp server. [ OK ] Finished Set console scheme. Starting Authorization Manager... [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started Authorization Manager. [ OK ] Started Accounts Service. [ OK ] Started Login Service. [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Finished Hobot Resize Root Filesystem. [ OK ] Created slice system-getty.slice. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Started Light Display Manager. [ OK ] Started Hostname Service. [ 7.900951] hobot mmap end!:15000000 Starting Network Manager Script Dispatcher Service... [ OK ] Started LSB: adb daemon. [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Started Bluetooth management mechanism. [ OK ] Created slice User Slice of UID 1000. Starting User Runtime Directory /run/user/1000... [ OK ] Finished User Runtime Directory /run/user/1000. Starting User Manager for UID 1000... [ OK ] Started User Manager for UID 1000. [ OK ] Started Session c1 of user sunrise. [ OK ] Started LSB: Custom self-starter. [ OK ] Reached target Multi-User System. Starting watchdog daemon... [ OK ] Started Start x11vnc at startup.. [ OK ] Started watchdog daemon. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Finished Update UTMP about System Runlevel Changes. Ubuntu 20.04.6 LTS ubuntu ttyS0 ubuntu login: